OpenBSD 3.2-stable (kernel-wi) #1: Sun Nov 17 10:42:04 EET 2002
    jt@ndevel:/home/jt/embedded/net4501/kernel-wi
cpu0: AMD Am486DX4 W/B or Am5x86 W/B 150 ("AuthenticAMD" 486-class)
cpu0: FPU
real mem  = 66695168 (65132K)
avail mem = 59863040 (58460K)
using 839 buffers containing 3436544 bytes (3356K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 20/20/03, BIOS32 rev. 0 @ 0xf00c0
pcibios0 at bios0: rev. 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0xa000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "AMD ElanSC520 Host-PCI" rev 0x00
hifn0 at pci0 dev 16 function 0 "Hifn 7951" rev 0x01: 128KB sram, irq 10
wi0 at pci0 dev 17 function 0 "Intersil PRISM2.5 Mini-PCI WLAN" rev 0x01: irq 11
wi0: PRISM 2.5 ISL3874A(PCI), Firmware 1.1.0 (primary), 1.4.9 (station), address 00:40:05:af:0f:1f
sis0 at pci0 dev 18 function 0 "NS DP83815 10/100" rev 0x00: irq 5 address 00:00:24:c0:55:e4
nsphyter0 at sis0 phy 0: DP83815 10/100 integrated, rev. 1
sis1 at pci0 dev 19 function 0 "NS DP83815 10/100" rev 0x00: irq 9 address 00:00:24:c0:55:e5
nsphyter1 at sis1 phy 0: DP83815 10/100 integrated, rev. 1
sis2 at pci0 dev 20 function 0 "NS DP83815 10/100" rev 0x00: irq 12 address 00:00:24:c0:55:e6
nsphyter2 at sis2 phy 0: DP83815 10/100 integrated, rev. 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <SanDisk SDCFB-64>
wd0: 1-sector PIO, LBA, 61MB, 490 cyl, 8 head, 32 sec, 125440 sectors
wd0(wdc0:0:0): using BIOS timings
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask 4000 netmask 5e20 ttymask 5e22
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302